SunFounder Project Starter Kit with 8G TF Card and Tutorial for Raspberry Pi 3B+ 3B

The Extension Board is perfectly crafted for continuous and heavy usage. Connect more than 4 devices at a time. Made of top quality material to perform long. If you use lots of electronic devices then one wall socket is not enough for you, you need an extension board. If your charger wire is short and you want to use the device at some place far then you can use an extension board.

There are two types of extension board one in which The cord can be wound into the extension itself. and the other one is in which the cord cannot be wounded into the extension. You can purchase any one of them as per your need.



Buy Now

Price:
$39.99

Product Description:

Introduction
This Ultimate Starter Kit is designed for the Raspberry Pi hobbyists, equipped with the basic components to use the Raspberry Pi including the TF card, the power cord, breadboard without soldering, colorful jumper wires, the RAB Holder for holding the Arduino boards, Raspberry Pi, some resistors, LEDs and buttons and so on. It works with Raspberry Pi 1 model B+, 2 model B, and 3 model B. This kit makes it possible for you to learn Raspberry Pi from scratch. Through this kit, you will learn the basics of using a Raspberry Pi – burning a system onto the Raspberry Pi and connecting it to the Internet, opening a Bash shell and using GPIO for control. Next, to learn programming.

Besides, some basic experiments are prepared for you to learn, therefore you will master how to write the code for simple experiments. With this simple but useful kit, you will learn the Raspberry Pi with ease, and be fascinated with applying it for more creative making works!

Package Included
4 x M2.5*6 Screw
6 x M3*6 Screw
2 x M3*10 Screw
8 x Resistor (220Ω)
8 x Resistor (1kΩ)
4 x Resistor (10kΩ)
8 x LED (red)
8 x LED (green)
8 x LED (yellow)
1 x RGB LED
5 x Button
1 x TF Card
1 x Power Cord
1 x Color Code Calculator Card
1 x RAB Holder
1 x T-Extension Board
1 x 40-Pin GPIO Cable
1 x Breadboard
65 x Male-to-Male Jumper Wire
1 x Case for Raspberry PiDesigned for the Raspberry Pi hobbyists, this entry-level learning kit leads you to step into the fantastic Raspberry Pi world from scratch.
With elaborate instruction manual on how to use Raspberry Pi including installation Raspbian system and do experiments, also the code explanation, so as to understand the Raspberry Pi quickly.
With an RAB Holder large enough to install a Raspberry Pi, an Arduino Uno or a Mega 2560 , and a breadboard altogether, making it convenient for building projects.
Equipped with 8G TF card Raspbian Preloaded, USB cable, LED, resistors, and more other necessary components for Raspberry beginners.
T-Extension Board & 40-Pin GPIO Cable with pin name marked for convenient wiring in experiments; Raspberry Pi NOT included.

If you have any doubts about this product, you can post a comment below, we try to solve the user queries as soon as possible.

Leave a Reply